What Maintenance Does My Water Softener Need?

December 12, 2018 9:56 pm Published by Leave your thoughts

Water softeners are valuable tools that make tap water useful for a number of tasks, regardless of its source. Water softeners add dissolved salts to mineral-rich water sources, reducing the number of dissolved solids in the water and making the water softer.

While water softeners may not necessarily be needed in homes that rely on a municipal water source, homes that use well water or draw water from rural sources should strongly consider installing water softening systems in Glenwood Springs, CO. Hard water can leave stains on your clothing, taste funky, have a bad odor and leave streaks on your floors, sinks and faucets. Investing in a water softener is a great way to ensure that your home retains its value.

Compared to many other types of household appliances, water softening systems in Glenwood Springs, CO are relatively easy to care for. In fact, they need virtually no maintenance when compared with many other household systems.

There are some small maintenance items, however, that you will need to perform on your water softener, like routinely replacing its salts. Here are just some of the maintenance tasks that you should plan to spend time performing on your home’s water softener:

  • Carefully select your salt: All water softening systems in Glenwood Springs, CO rely on dissolved salts to remove minerals and other dissolved particulates from your water supply. The type of salt that you use, however, can greatly impact the effectiveness of your system. Evaporated salt has the fewest contaminants and is best, followed by solar and rock salts.
  • Clean your resin bed: Over time, the resin bed in your water softener may become filled up with iron, organic material and silt that can reduce the effectiveness of your water softening system. You should flush the resin bed with a specially formulated cleaner every couple of months to keep your water softener in prime condition.
  • Clean the valve and nozzle: At least twice a year, you should remove the venturi valve and nozzle from your water softening system. This component is essential to the successful operation of your water softener, and it should be thoroughly cleaned with soapy water so as to remove any built-up salt or mineral deposits.
  • Avoid crusts and mush: When the salt in your water softener system begins to recrystallize, you’ll need to address the issue at hand immediately. Crusts form over the top of the water in the softener tank, and can usually be fixed by being broken up with the handle of a broom. Mush will require you to drain the softener, clean it and replace the old salt.

For more than a decade, Garrett Hansen Plumbing Inc. has been a trusted source for water softening systems in Glenwood Springs, CO. We’re proud to provide each of our clients with quality, dependable water treatment systems that they can rely on. To learn more about our high-quality product offerings, or to find out if any of our plumbing solutions are right for you and your home, reach out to one of our friendly, knowledgeable representatives today.

Categorised in:

This post was written by Writer

Leave a Reply

Your email address will not be published. Required fields are marked *